Kontrol-Karrier Heavy Duty Below Hook Drum Carrier allows you to lift, move and pour a drum weighing up to 1500 lbs. or a half full drum up to 800 lbs. To load the drum lifter, simply move the drum holder against the drum and cinch the chain. The slots in the bottom of the frame can be used as a chain lock to prevent the drum from tilting. To do so, crisscross the chain and insert one side into each slot. This drum carrier complies with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following: Rated load markings and unit identification.
- Equipped with MORcinch Drum Holder to handle a 55 gal steel drum with 22" - 23.5" OD between ribs
- standard drum tilt control is a chain wheel with 12' chain loop
- Lifts the drum & rotate drum 360° in either direction
- Drums can be held at any tilt angle
- Drums can be held at any tilt angle
- Minimum design safety factor of 3, based on yield strength, for load bearing structural components
- All welding is in accordance with ANS/AWS D14.1 & ASME BTH-1